Product Catalog

  • Manufacturer: Hitachi Power Tools
  • Model Number: 18008

For cutting fiber cement board. Thin kerf, .087", saw blades for circular saws. Crosscutting and ripping of fiber cement board, siding, and trim. Lasts 5 times longer cutting life than other diamond tipped blades and 30 times longer than traditional carbide blades. Construction grade.

  • Manufacturer: Apex Fountains
  • Model Number: 0590RBJN

5/8" max, 52" overall length, 90 deg/180 deg bend

  • Manufacturer: Apex Tool Group
  • Model Number: CX6PT20

Pass-Through socket set, 3/8" ratchet. 20 pieces.

Three outlet adapters with high gloss, extra durable, super flexible wire. Solid molded power block head stands up to heat, cold and rough use. 15 amp/125 volt insulated wire. Meets OSHA standards, UL Listed. Yellow. Sleeved

  • Model Number: H30-8D6

Die cast frame and through hardened steel components for extreme durability.
Quick-load magazine.
Tool-free jam clearing.

Perfect for insulation, plastic sheeting, roofing paper, and moisture wrap.

  • Manufacturer: Stanley
  • Model Number: 16-150

Features & Benefits:
Forged steel blade for long life.
Fully precision-ground blade on all faces.
Blade coated with lacquer for rust resistance.
Durable and comfortable polypropylene handle.
Short series blade for strength and control.

  • Manufacturer: Makita Power Tools
  • Model Number: XPH102

The Makita 18V LXT® Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill combines speed and torque in a compact size, with an efficient lithium-ion battery that reaches a full charge in only 30 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete.

The Makita-built four-pole motor delivers 480 in.lbs. of Max Torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. With Extreme Protection Technology (XPT™), the drill is engineered for increased dust and water resistance and is ideal for use in harsh job site conditions.

  • Manufacturer: Forney Industries
  • Model Number: 71985

Flap Disc, Blue Zirconia, 40 Grit Type 29, Depressed Center, 4-1/2" with 7/8" Arbor ZA40, for right angle grinders. Cuts fast and outlast sanding discs 10-to-1. Great flexibility. Ideal for rough or fine finishing. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Laminated by state-of-the-art automated equipment. Reinforced fiberglass backing plate. Each disc balance tested for vibration-free grinding/finishing.

  • Manufacturer: Makita Power Tools
  • Model Number: HS7600

The HS7600 has a powerful 10.5 AMP motor and weighs only 8.6 lbs. for a high power-to-weight ratio. It has a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The large cutting capacity (2-1/2” at 90°, 1-5/84” at 45°) with a maximum bevel capacity of 0°-45° is ideal for most common angles. Ease of use features include easy-to-read markings on the depth and bevel scales, on-board blade wrench, and a flat motor housing design for stability when changing the blade. The lower guard design improves performance when making bevel and narrow cuts.

  • Manufacturer: Makita Power Tools
  • Model Number: BO5030K

The BO5030K features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030K is precision engineered with all ball bearing construction for longer tool life.

  • Manufacturer: Calculated Industries

The AccuMASTER XT Moisture Meter is ideal for measuring moisture content in firewood, lumber, brick, concrete, drywall, plaster and carpet. Find moisture before it becomes a costly problem. Check walls before painting, staining or sealing and check patios before treating. Also, locate water leaks in roofs and floors.

Easy to use - just pop off the protective cover, then firmly push the (replaceable) sharp, stainless steel pins into the material you want to measure. Large, easy-to-read digits and clearly-designed icons tell you immediately if the Moisture Content is High, Medium or Low. Plus, there are also audible High, Medium, Low alerts so you will be able to hear the level even if you are in a dark or awkward space where you can't see the screen.

  • Manufacturer: Calculated Industries
  • Model Number: 1194

The AirShim Pro XL is an Inflatable Pry Bar and Leveling Tool that is great for installing and leveling cabinets, doors, windows, appliances, furniture, countertops and more. Its long, narrow design provides for greater lifting in the contact area.

It is powerful enough to support up to 500 pounds and soft so it won't scratch surfaces. The AirShim Pro XL spans gaps from 3/32" to 3" providing precise adjustment while lifting, aligning, leveling and plumbing during installation. Plus with its 10.75" long surface, the AirShim Pro XL provides a stable lifting platform that does not wrap or fold around narrow work surfaces like a door edge.

  • Manufacturer: Irwin
  • Model Number: 394001

When you are faced with a rounded-off, rusted-tight or painted-over bolt, bolt extractors will break it free.
Reverse spiral flutes are designed to bite down to provide maximum gripping power.
High carbon steel ensures longer life and greater durability.
Universal lobular design fits all types of fasteners.
3/8" square drive for use with hand ratchets, impact wrenches, and air ratchets; hexagonal flats for use with flat wrench, pliers, adjustable wrench, sockets or VISE-GRIP locking pliers.
Set includes plastic case.

  • Manufacturer: Irwin
  • Model Number: 274001SM

The Quick Adjusting Pipe Wrench is built with convenience and durability in mind.
One-handed operation enhances user's speed and convenience.
Ratchets quickly to work surface.
Smooth release upon job completion.
Broached teeth are ideal for most surfaces including black, galvanized, PVC and copper pipe, as well as nuts, bolts and couplings.
43% less weight than standard 14" cast iron pipe wrenches.
Ergonomic handle ideal for heavy torque and maximum comfort.
Riveted to heat treated steel body.

  • Manufacturer: Makita Power Tools
  • Model Number: XSL06PT

Cuts up to 6-5/8" crown (nested), 5-1/4" base (vertical), and crosscuts a 4x12 at 90°. X2 LXT® technology delivers up to 334 cuts per charge in 2x4 SPF lumber using two 5.0Ah batteries. Unique 2-Steel Rail Sliding System offers a reduced footprint and operation flush against a wall. In-front bevel lock for convenient operation. (2) 18V LXT® 5.0Ah batteries, dual port rapid charger, blade, dust bag, vertical clamp, wrench, and triangle.

  • Manufacturer: Makita Power Tools
  • Model Number: XPS01PTJ

Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts. Variable speed control dial (2,500 - 6,300 RPM) for optimum performance in a variety of materials. Easy to set depth adjustment with large scale. Slide lever on base engages the guide rail (sold separately) when bevel cutting for stability. (2) 18V LXT® 5.0Ah batteries, dual port rapid charger, 55T carbide-tipped blade, wrench, (2) cases.

  • Model Number: 53502

For Painting. Features: Safety Locking Legs And Non-Skid Feet; Slip Resistant Standing Surface; Lightweight And Easy To Carry, Set Up, Fold And Store; Works Comfortably Along Walls And Windows. 20" Standing Height. 39" X 12" Surface Area.

  • Manufacturer: Makita Power Tools
  • Model Number: DA3010F

With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.

  • Model Number: 05212

Eliminates possibility of damage to threads, walls and external finish. Provides non-slipping grip on the inside of nipples, pipes and fittings. Can be turned in either direction. Constructed of head-treated alloy steel.

  • Manufacturer: Stanley
  • Model Number: 060864R

Holds 1000 Lbs Per Pair; Light Weight - Easy To Transport; Integral V Groove And Tray Opens Up To Hold Your Tools.

  • Model Number: 4000-2/30

Variable Speed For Greater Versatility. High Performance Motor For Maximum Performance At All Speeds. Electronic Feedback For Consistent Speed Under Load. Can Be Used With All Dremel Accessories And Attachments. Specs: Cord Length 6', Speed 5,000 To 35,000 Rpm, Voltage 120 AC/50-60 Hz, Weight 18.8 Oz. Includes: Dremel 4000 Rotary Tool, Circle Cutter/Straight Edge Guide, Sanding/Grinding Guide, Storage Case, Quick Start Book.

  • Manufacturer: Irwin
  • Model Number: 1840315

Set Contains: (2) Impact Insert Bit #1 Phillips X 1'' OAL, (3) Impact Insert Bit #2 Phillips X 1'' OAL, (2) Impact Insert Bit #3 Phillips X 1'' OAL, (2) Impact Insert Bit #1 Square Recess X 1'' OAL, (3) Impact Insert Bit #2 Square Recess X 1'' OAL, (2) Impact Insert Bit #3 Square Recess X 1'' OAL, (1) Impact Insert Bit T10 X 1'' OAL, (1) Impact Insert Bit T15 X 1'' OAL, (1) Impact Insert Bit T20 X 1'' OAL, (1) Impact Insert Bit T25 X 1'' OAL, (1) Impact Insert Bit T27 X 1'' OAL, (1) Impact Insert Bit T30 X 1'' OAL, (1) Impact Insert Bit T40 X 1'' OAL, (2) Impact Power Bit #2 Phillips X 2'' OAL, (1) Impact Power Bit #2 Square Recess X 2'' OAL, (1) Impact Power Bit T20 X 2'' OAL, (1) Impact Power Bit T25 X 2'' OAL, (1) Impact Power Bit T30 X 2'' OAL, (1) Impact Nutsetter Lobular Magnetic 1/4'' X 3'' OAL, (1) Impact Nutsetter Lobular Magnetic 5/16'' X 3'' OAL, (1) Impact Nutsetter Lobular Magnetic 3/8'' X 3'' OAL, (1) Compact Magnetic Screw Guide -3-1/16'', (1) Impact Socket Adapter 1/

  • Manufacturer: Irwin
  • Model Number: 394001

Five-Piece Base Set Is Made Of High Carbon Steel. Reverse Spiral Flutes Are Designed To Bite Down To Provide Maximum Gripping Power. Universal Lobular Design Fits All Types Of Fasteners. 3/8" Square Drive For Use With Hand Ratchets, Impact Wrenches, Air Ratchets, Hexagonal Flats For Use With Flat Wrench, Pliers, Adjustable Wrench, Sockets Or VISE-GRIP Locking Pliers. Includes One Each: 3/8", 7/16"(11mm), 1/2", 9/16"(14mm), And 5/8" (16mm).