Product Catalog

  • Manufacturer: Irwin
  • Model Number: 0053991

Converts from a bar clamp to a spreader easily, no tools required; 7-1/2" minimum spreading capacity with 3-1/4" throat depth. New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Removable Pads.

  • Model Number: 6115265

Compact, Tests AC/DC Voltage To 300 Volt, DC Current To 250mA, Resistance To 1 M Ohm, Decibels From -20 To +56dB. Diode Protected. With Fuse Overload Protection Circuitry. 250 MA Fuse. Includes Safety Test Leads And Instruction Manual. CAT Rating: II 300 Volt. CETLus Approved.

  • Model Number: WX254L

Rapid Reloadable Cartridge allows you to store 6 bits in the tool, eliminating lost bits and time spent looking for them
Advance the correct bit with a simple slide-action - no more fumbling around with small bits
Front-mounted LED light means no more working in the dark
Powerful 4V MaxLithium battery holds a charge for up to 12 months
Side-mounted switch allows you to operate in reverse, and the rubber handle provides a comfortable grip

  • Manufacturer: Cretors
  • Model Number: 2155588

Illuminates With Less Heat Than Typical Halogen Work Lights. Durable Polycarbonate Lens. Friction Tension Hinge Allows For Flexible Adjustment To Any Angle, Two Powerful Earth Magnets Allow For Secure Contact On Most Metals. Do Not Use Magnet For Horizontal Overhead Mounting. Reflective Strips Improve Visibility. Nylon Hook Rotates 90 Degrees. AC Adapter For Household Charging, DC Adapter For Car Charging. Batteries Will Reach Full Charge In About 4 Hours. LED Indicator Light Glows Red While The Batteries Are Charging. When The Light Is Fully Charged, The LED Indicator Light Turns To Green. Operates 2 Hours On A Full Charge.

  • Model Number: 7774300

Super duty, 14 gauge steel blades. For digging post holes in hard, rocky soil. Beveled edge for easy soil penetration.

  • Model Number: 9924937

Holds up to 500 lbs (Total weight when using BOTH sawhorses); non-slip feet; flip-up edge guides; non-slip rests; fold to less than 2" for easy storage. Dimensions: H-33.07" x L-23.03" x W-16.14".

  • Manufacturer: Stanley
  • Model Number: 3442514

Made from forged, high-carbon steel, long reach for greater leverage in nail pulling, lifting or prying. High visibility, powder coated finish.

  • Model Number: 3902913

Includes 1/2", 3/8", 5/16", 9/32", 1/4", 15/64", 7/32", 13/64", 3/16", 11/64", 5/32", 9/64", 7/64", (4) 1/8", (4) 3/21", (3) 5/64", (4) 1/16" Drill Bits And Carrying Case.
TITANIUM NITRIDE COATED
135 DEGREE SPLIT POINT

  • Manufacturer: Stanley
  • Model Number: 6210140

High Impact, High-Visibility Yellow Case Stands, High-Contrast Blade For Easy Readability With A 7' Standout.
ABS CASE
HIGH VISIBILITY
Blade W InxL Ft=1x25

  • SKU: 5869771
  • Model Number: 1579

Removable Metal Frame Partition Slides Into Place To Customize Tool Box To Your Storage Needs. Wide Open Space Below Handle For Easy Access To Tool Carrier's Main Compartment. Plastic Reinforced Internal Pocket For Utility Knife Or Other Tools. Sturdy Metal Handle Bar With Molded Foam Grip For Easy Carrying. Multi-Use Pockets To Organize A Wide Range Of Tools And Accessories. Adjustable, Padded Shoulder Strap With Metal Hardware. 20"L X 11" H X 11"D.

  • Model Number: A233

Our Tech Gear™ 18" MegaMouth™ tool bag with an integrated speaker system that’s designed to work with your iPod®, MP3 player or other portable audio device to output quality stereo sound, has a large main compartment and 39 pockets to hold your favorite hand tools.

  • Manufacturer: Milwaukee Elec Tool

The Milwaukee® FASTBACK II™ Flip Utility Knife features Press and Flip, a one handed blade opening for easy activation and activates the blade up to 3X faster than a 2-handed opening. This addition to the FASTBACK™ family features magnetic blade storage that holds one blade and folds into the knife body. A tool free blade change allows for fast and efficient adjustments, while a thin all metal body stands up to jobsite abuse. The wire form belt clip makes it easy for a user to store the knife without tearing up the pocket. The integrated gut hook and wire stripper also increase utility.

  • UPC: 727708084308

Use in reverse only when drilling and extracting.

Grabit®-Pro 4 piece kit works on broken bolts from as small as No. 10 to as large as 3/8 in. (5mm - 10mm). Can drill up to grade 8 or 10.9 class fasteners. Quickly and easily removes most damaged screws such as Hex, Phillips, Torx, Square Drive; sizes No.4 - 24 from wood, plastic or metal up to 3 inches in length.

Serrated extracting end of tool results in greater torque for hard to remove bolts and screws. Professional grade multi-purpose extractor compatible with "quick-connect" chuck systems or chucked directly into drill. Good for multiple extractions with single tool.

Lubricating system cuts through soft metals like aluminum, copper and stainless steel without overheating or warping. Less splintering and breaking. Tungsten carbide tips. Kerf .131". Arbor: 5/8".

    7.5 AMPS
    DOUBLE CUT
    Brand:"PROFESSIONAL WOODWORKER"
    Blade Cap In=5

SKU: 9924903

New Plank RiteTM spacing and screw/nail guide tool can save time, energy and lots of frustration building a deck. It's a simpler, easier way to get a professional finish.

  • SKU: 9924903

Lubricating system cuts through soft metals like aluminum, copper and stainless steel without overheating or warping. Less splintering and breaking. Tungsten carbide tips. Kerf .131". Arbor: 5/8".

  • Manufacturer: Stabila Levels

Crystal clear vials readable in any direction with no change in accuracy tolerance with spring steel hairline indicators in vials. Best frame strength-to-weight ratio. Removable endcaps for scribing in corners and for reading tight header and sill openings. Rubber endcaps grip walls and do not leave marks. Metal Hang hole for storing level on site and large comfortable rubber hand holes.

  • Manufacturer: Makita Power Tools

With nearly 100 years of experience in advanced motor design, Makita applies the latest innovation to engineer and manufacture the best power tools in the world. Makita Power Tools have more power and less weight, and are more compact and more efficient than any other. At jobsites around the world, professional users are dumping the old, getting the new and gearing-up with Makita. Makita offers more solutions for the professional trade.

Click here for more information

Built-in orgnization compartments, convenient lift out carry tray.

  • Manufacturer: Stanley
  • Color-coded handles make choosing the right screwdriver from the tool pouch a quick and easy task
  • Ergonomic four-sided handles with slip-resistant grip provide greater comfort than traditional handles
  • Cold-formed Phillips tips allow for precise geometry and perfect fit for fasteners
  • Heat-treated alloy steel blades hold up to repeated use
  • Nickel plated bars deliver corrosion resistance for long-lasting durability

 

  • Manufacturer: Black & Decker
  • Model Number: MSW100
  • With 16 socket sizes, one wrench is all you need
  • Includes 16 of the most popular standard (SAE) and metric (MM) socket sizes
  • Durable rubber grip provides comfort for high-torque applications
  • Color-coded socket sizes are easy to identify
  • Built to last, with a durable design and lifetime warranty

  • Manufacturer: DeWalt Tools
  • Model Number: DW317K
  • Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
  • 5.5 Amp motor deliver powerful cuts in the hardest materials
  • Variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed
  • 4-position orbital action allows for faster, more aggressive cuts in a variety of materials
  • All-metal gear case provides superior durability on a professional site
  • Shoe bevels 0° to 45° for beveled cuts

 

Special Offers

( Print This )

Join us at S.J. Neathawk Lumber Co, Inc. of Lewisburg on Thursday, April 25th & Friday, April 26th for the ultimate Makita Tool Show! Explore on-site demos, receive exclusive discounts on tools, and meet on-site reps....
Offered By: S.J. Neathawk Lumber Co, Inc.