Product Catalog

  • Manufacturer: Bosch Power Tools
  • SKU: 5259643
  • Model Number: 11255VSR

HammerHook allows quick tool storage during the job. 0-1,300 rpm; 0-5,800 bpm. Multi-function selector provides 3 modes of operation: rotation only, rotary hammer and hammer-only mode. Vario-Lock positioning rotates and locks chisel into 36 different positions to optimize working angle.

  • Manufacturer: Makita Power Tools

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw (model XCU03Z, the tool only). With zero emissions, lower noise, and considerably less maintenance, the XCU03Z is a welcome solution for cutting and trimming applications.

  • Manufacturer: DeWalt Tools
  • Model Number: ORGILL SKU# 3463221
  • Includes (1) 18V - 20V MAX* Adapter

  • Manufacturer: Wooster Brush Company
  • Model Number: 1801

Reduces drag for highly efficient drywall sanding. Unique 9 1⁄2” triangular shape to cover large surfaces and reach into the corners

  • Manufacturer: Makita Power Tools
  • Model Number: 2705X1

Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the job site. The 2705X1 combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is job site tough for easy transport.

 

  • Manufacturer: Worx
  • Model Number: WX252L

The XTD Xtended Reach Driver is a compact, powerful screwdriver that reaches where others cannot. It features an extending, offset design that provides easy access to recessed or hard-to-reach areas. The 4V MaxLithium battery stays charged for up to 18 months, allowing you to tackle any task around the house with the lightweight Xtended Reach Driver.

  • Manufacturer: Hitachi Power Tools
  • Model Number: 18008

For cutting fiber cement board. Thin kerf, .087", saw blades for circular saws. Crosscutting and ripping of fiber cement board, siding, and trim. Lasts 5 times longer cutting life than other diamond tipped blades and 30 times longer than traditional carbide blades. Construction grade.

  • Manufacturer: Makita Power Tools
  • Model Number: XPH102

The Makita 18V LXT® Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill combines speed and torque in a compact size, with an efficient lithium-ion battery that reaches a full charge in only 30 minutes. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete.

The Makita-built four-pole motor delivers 480 in.lbs. of Max Torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. With Extreme Protection Technology (XPT™), the drill is engineered for increased dust and water resistance and is ideal for use in harsh job site conditions.

  • Manufacturer: Forney Industries Inc
  • Model Number: 71985

Flap Disc, Blue Zirconia, 40 Grit Type 29, Depressed Center, 4-1/2" with 7/8" Arbor ZA40, for right angle grinders. Cuts fast and outlast sanding discs 10-to-1. Great flexibility. Ideal for rough or fine finishing. Multiple layers of zirconia cloth flaps constantly exposing new extra sharp grinding points. Laminated by state-of-the-art automated equipment. Reinforced fiberglass backing plate. Each disc balance tested for vibration-free grinding/finishing.

  • Manufacturer: Makita Power Tools
  • Model Number: HS7600

The HS7600 has a powerful 10.5 AMP motor and weighs only 8.6 lbs. for a high power-to-weight ratio. It has a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The large cutting capacity (2-1/2” at 90°, 1-5/84” at 45°) with a maximum bevel capacity of 0°-45° is ideal for most common angles. Ease of use features include easy-to-read markings on the depth and bevel scales, on-board blade wrench, and a flat motor housing design for stability when changing the blade. The lower guard design improves performance when making bevel and narrow cuts.

  • Manufacturer: Makita Power Tools
  • Model Number: BO5030K

The BO5030K features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030K is precision engineered with all ball bearing construction for longer tool life.

  • Manufacturer: Makita Power Tools
  • Model Number: XSL06PT

Cuts up to 6-5/8" crown (nested), 5-1/4" base (vertical), and crosscuts a 4x12 at 90°. X2 LXT® technology delivers up to 334 cuts per charge in 2x4 SPF lumber using two 5.0Ah batteries. Unique 2-Steel Rail Sliding System offers a reduced footprint and operation flush against a wall. In-front bevel lock for convenient operation. (2) 18V LXT® 5.0Ah batteries, dual port rapid charger, blade, dust bag, vertical clamp, wrench, and triangle.

  • Manufacturer: Makita Power Tools
  • Model Number: XPS01PTJ

Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts. Variable speed control dial (2,500 - 6,300 RPM) for optimum performance in a variety of materials. Easy to set depth adjustment with large scale. Slide lever on base engages the guide rail (sold separately) when bevel cutting for stability. (2) 18V LXT® 5.0Ah batteries, dual port rapid charger, 55T carbide-tipped blade, wrench, (2) cases.

  • Manufacturer: Makita Power Tools
  • Model Number: DA3010F

With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.

  • Model Number: 4000-2/30

Variable Speed For Greater Versatility. High Performance Motor For Maximum Performance At All Speeds. Electronic Feedback For Consistent Speed Under Load. Can Be Used With All Dremel Accessories And Attachments. Specs: Cord Length 6', Speed 5,000 To 35,000 Rpm, Voltage 120 AC/50-60 Hz, Weight 18.8 Oz. Includes: Dremel 4000 Rotary Tool, Circle Cutter/Straight Edge Guide, Sanding/Grinding Guide, Storage Case, Quick Start Book.

  • Manufacturer: Irwin
  • Model Number: 88886

Blue-Groove Point And Cutting Edge For Faster Chip Removal; Double Cutting Spurs Scribe The Outside Of The Hole Reducing Breakout. Grooved Hex Shank Prevents Slipping In Drill Chuck Or Bit Extension, Fits All Standard Quick Change Chucks. Includes (1) One Each: 3/8", 1/2", 5/8", 3/4", 7/8" And 1". All Are 6" Long Standard Length Drill Bits.

1/4 - 9/16 In, 18 Ga, 100 Staple. Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. Specs: 100 staples capacity, 60 to 100 PSI, H-8.9" x L-8.1" x W-2.2". Tool Weight: 2.9 lbs. Fastener Specifications: Drives 1/4" thru 9/16" Surebonder No.4 Heavy-Duty Staples (same as Arrow T50), 1/4", 5/16", 3/8", 1/2", 9/16" Staple Lengths. Includes: High-Impact Carrying Case.

  • Model Number: SS2001

3.6 volt Lithium screwdriver, 180 rpm provides good speed with 35.6 in. lbs of torque. Built-in LED light for visibility inside cabinets, closets or outside after dark. Compact size and very light weight at 1.06 lbs. Includes USB charger and screwdriver bit.

  • Model Number: RK5151K

3.4 degree and 5 degree Duotech Oscillation technology puts speed and control into one tool ensuring you have the proper power and precision no matter what type of cut you're making. Lets you select between 2 modes: power and precision, to fit your job. 

  • Manufacturer: Makita Power Tools
  • Model Number: XSF03M
  • BL™ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
  • Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
  • The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
  • Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
  • The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Ergonomically designed rubberized pistol grip with large 2-finger trigger for increased comfort
  • Adjustable nose piece delivers consistent screw depth
  • Lock-on button for continuous use
  • Compact and ergonomic design at only 9-7/8" long

  • Manufacturer: Westinghouse
  • Model Number: WH7500E

Simplified Operator Control Center. Easy to start with our Westinghouse One-Touch Electric Start System. Iron sleeved engine for long durability and low maintenance. Features our exclusive VR System-Voltage regulated power. Quiet operation via our Pulse-Flo muffler- creating one of the quietest generators on the market. Includes everything to get started right out of the box-wheel kit & handle kit (some assembly required) oil, funnel, and a tool kit

  • Manufacturer: Westinghouse
  • Model Number: WH5500

Includes everything to get started right out of the box-wheel kit & handle kit (some assembly required) oil, funnel, and a tool kit. Quiet operation via our Pulse-Flo muffler- creating one of the quietest generators on the market. Features our exclusive VR System-Voltage regulated power. Iron sleeved engine for long durability and low maintenance. Simplified Operator Control Center

  • Manufacturer: Milwaukee Elec Tool
  • Model Number: 8218877

Compact 1/2" drill/driver with 425 in-lbs of torque, weighs 4 lbs., 1/4" hex impact driver with 4-pole frameless motor with 1400 In/lbs. of torque. Includes: 2 tools, (2) 18V Red Lithium compact battery packs, (1) 18V charger, (1) carrying case.